STC Valve Inc Logo Flow Control Valve Stainless Steel Push In Elbow Fitting Stainless Steel Compression Fitting Pneumatic Air Valve Bronze Two Way Process Valve Stainless Steel Manual Ball Valve Stainless Steel Air Actuated Ball Valve Manual Four Way Air Valve Air Filter Regulator Lubricator Combination Air Filter Regulator Lubricator Combination Contact Us
Support & Downloads
Home 1 Push In Fittings 2 Stainless Steel Fittings 3 Compr.&
Barb Fittings
4 Solenoid Valves 5 Process Valves 6 Manual
Ball Valves
7 Actuated Valves 8 Air Valves 9 Air Regulators 10 Air Cylinders Click Here
to Order

Call us at (650) 856-8833 or email us at Sales@StcValve.com.

Hand-Operated Pneumatic Valve with Three Position Lever, Pressure Center: 4H230P-M/S

The 4H230P is a manual pneumatic directional valve with a four-way operation & five ports (P = Pressure, A = Outlet 1, B = Outlet 2, EA = Exhaust for port A, EB = Exhaust for port B). Four-way, three-position, pressure center valves are generally used to stop a double acting cylinder in partial stroke, with pressure on both ends of the cylinder at the center position. This valve is available with either a Detented (-M) or Non-Detented (-S) lever.

Please note that there have been recent design updates to this valve. The specific changes can be found here (see pg. 5): Pneumatic Valve Design Changes. For inventory status of each version, please call us at (650) 856-8833.

4H230P-M/S
Operation

4-Way, 5-Port, 3-Position Lever, Pressure Center
M = Detented
S = Non-Detented (Spring Return)

M =
Type Hand Operated Directional Air Valve S =
Port Size 1/4" NPT (1/8" Exhaust Ports)
Operating Pressure 0 to 116 PSI
Operating Temperature 14 to 140°F (-10 to 60°C)
Action Direct Acting
Flow Coefficient (Cv) 0.89
Working Medium 40 Micron Filtered Air or Inert Gas
Body Material Anodized Aluminum
Seal Material NBR (Buna N)
Lubrication Not Required



Home Terms of Use Terms of Sale Career Contact Us Click Here to Order
Sizto Tech Corporation © 2001-. All rights reserved. Last modified: March 8, 2017.
Information contained herein may be changed without prior notification.